YJ-7200Plus Automatic Hematology System
Parameter
37 blood report parameters:
WBC, NEU%, LYM%,MON%,EOS%, BAS%, NEU#, LYM#, MON#,EOS#, BAS#,IG#,IG%,RBC,HGB,MCV, HCT, MCH,MCHC,RDW-SD, RDW-CV, NRBC%,NRBC#, PLT, MPV, PCT PDW,P-LCR, P-LCC, RET%,RET#,IRF LFR,MFR,HFR,RHE,IPF
7 body fluid report parameters:
WBC-BF TC-BF#MN#,MN%,PMN#,PMN% RBC-BF Test Principle Cyanide-free colorimetry for HGB test Sheath impedance method for RBC and PLT test Semiconductor laser flow cytometry for WBCRBCNRBC test Throughput CBC+DIFF: 120 samples / hour CBC+DIFF+RET:83 samples / hour BF: 40 samples / hour Data Storage Capacity At least 500, 000 results Data System RJ45 networkinterface.USB interfacecan be connected to LIS/HIS
1.Advanced Platform:
Nucleic acid fluorescence staining integrated with semiconductor laser flow cytometry
Side fluorescent light (SFL)
* Nucleic acid content of cells
Side scatter {SSC)
*Internal cell structure
Forward scatter (FSC)
* Cell volume information
The advanced platform realizes the analysis of the RET channel scatter plot and the high, medium and low fluorescence intensity of the region through the permeation of fluorescence dye into the cell and nucleic acid material binding, to obtained 7 RET parameters (RET%,RET#, IRF, LFR, MFR, HFR, RHE).
Once the deviation of PLT-0 in the RET channel and the PLT measured by the sheath impendance method is found to be too large, the software will give a prompt alarm, which can effectively reduce the interference caused by platelet agglutination, large platelet, cell debris and other factors on the PLT count.
2.Multiple Test Modes
5 sample analysis modes and 5 test modes can be chosen freely
Analysis mode: Automatic whole blood mode, Whole bloodmode, Pre-dilute mode, Micro-WB mode, Body Fluid mode
Detection mode: CBC, CBC+DIFF RET, CBC+DIFF+RET, CBC+RET
Body fluid mode
Supporting body fluid test by providing
7 reportable parameters
(WBC-BF, TC-BF#, MN#, MN%, PMN#, PMN%, RBC-BF)
3.New Breakthrough
Automatic recheck function
When the automatic recheck function is enabled, the sample will be automatically rechecked when the PLT and WBC count values are lower than the set threshold to reduce the microscopy rate.
Low value WBC detection function
4.Flexible Combination
O Free combination of 1-4 modules, measuring speed can be up to 480 test/hour, meeting the requirements of large and medium-sized laboratories for large volume testing.
O Supporting pre-storage and collecting tray, expanding sample positions up to 520, improving test efficiency of batch test.
Audited Supplier 
){kind=link}
){kind=link}