Portable Dental X Ray Camera Digital Portable Handheld X-ray Machine

• Customization: Available
• Customized: Customized
• Certification: CE, EEC, ISO13485
• Model NO.: YJ-DXP30
• Scale: Small
• Product: Dental X-ray Machine
• Model: Yj-Dxp30
• Tube Voltage: 65kv
• Tube Current: 1mA
• Exposure Time: 0.1-1.8s
• Rated Power: 60W
• High Pressure Generator: 30kHz DC
• Focal Spot to Skin Distance: >20cm
• Focus Spot Size: 0.3mm(Toshiba)
• Charger Input Voltage: AC110V-220V
• Supply Frequencyn: 30Hz
• Radiation Leakage: <20ugy/H
• Battery: 24V DC2600mA
• Weight: 2kg
• Dimensions: 37 Cm×31cm×28cm(L×w×h)
• Transport Package: Standard Exporting Package
• Specification: 37*31*28 mm
• Trademark: FORERMED
• Origin: China
• HS Code: 9018129100
• Production Capacity: 1000pieces/Month

Product Description

Portable Dental X Ray Camera Digital Portable Handheld X-Ray Machine

Product Description

 

Portable Dental X Ray Camera Digital Portable Handheld X-Ray Machine
Model	YJ-DXP30
This model combines the advantages of similar products found at home and abroad; it eliminates the shortcomings of the on-frequency X-ray machine (high current intensity and excess amounts of scrap x-rays).Using a Toshiba 0.3 micro-focus tube.The tube voltage frequency of this machine is 30 KHz,and the tube current is 1 MA. The radiation scope is at an angle of 24 degrees, located within a distance of 1.2 meters ahead. This is an innovative Chinese design named the "Green X-ray Machine."

Detailed Photos

Tooth	Upper	Lower
1-2	42	-15
3	45	-18
4-5	30	-10
6-8	28	-5

Product Parameters

Uponreceiving,open the box and check the product for possible damage during shipping. Makesure the fittings on the encasement list are packaged within the box. Install the blue ray tube to the foreside of the ball head,then tighten it. Turn on the Power;the pilot lamp will be light up.During this time,the digital tube will show the fore setting time. Now the equipment is in standby mode. Setting the time (Skip to next step if unneeded) Use the "SET","+",and"-" buttons to reset the time as follows: press SET,the pilot lamp above is illuminated, the machine is now in the time setting mode →then press "+" and"-" to set the time needed (time range is 1-9seconds); press set again when the time is adjusted the light lamp is off. The equipment is nowin standby mode. Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible (the smooth side stick to the tooth) Keep the ball head plumb to the tooth projection position; Have the ball head,tooth, and tooth film steadily mutually plumb.

 

Certifications

Tube Voltage	65kv
Tube Current	1mA
Time Exposure	0.1-1.8s
High pressure generator	30kHz DC
Rated Power	60w
Focal Spot To Skin Distance	>20CM
Focus Spot Size	0.3mm(TOSHIBA)
Charger Input Voltage	AC110V~220V

Company Profile