Class B Dental Autoclave Steam Sterilize
Thank you for choosing our steam sterilizers.
Prior to operating this instrument, please read the operations manual carefully and follow all installation instructions.
Need Maintenance
If E88 appears on the screen when power on or appears on the report, please call your dealer or local service maintenance. Your steam sterilizer needs regular maintenance.
1. General
The sterilizer described in this manual is intended for the sterilization for medical, dental, beauty, Vet, and Tattoo fields. It operates automatically with 134°C and 121°C sterilization temperatures. This sterilizer is in compliance with the European Directive 93/42/CEE and it has been produced in accordance with the EN 13060.
2. Technical specifications
| Item |
Parameter |
| Chamber |
Φ 230mm x 360mm |
| Rated Voltage |
AC 220-240V 50Hz (110-130V 60Hz) |
| Circuit breaker |
F16A/400V (F20A/400V for 120V) |
| Nominal power |
1750VA |
| Sterilization |
121°C /134°C |
| Capacity of the distilled water tank |
Approx 2.5 L (Water at level Max) |
| Approx 0.5 L (Water at level Min) |
| Operation temperature |
5°C-40°C |
| Exterior dimensions |
440mm(W)*400mm(H)*620mm(D) |
| Net weight |
42kg |
| Noise level |
<70 dB |
| Relative Humidity |
Max 80%, non condensing |
| Atmospheric pressure |
76 k/Pa - 106 k/Pa |
3. Packing content
| No. |
Item |
Quantity |
| 1 |
Steam sterilizer |
1 |
| 2 |
Instrument tray |
2 |
| 3 |
Instrument tray rack |
1 |
| 4 |
Instrument tray handle |
1 |
| 5 |
Door adjustment tool |
1 |
| 6 |
Draining hose |
2 |
| 7 |
Instruction manual |
1 |
| 8 |
Door seal |
1 |
4. Installation
- Ensure that the sterilizer is installed with 10cm ventilation space on all sides of the sterilizer, and 20cm on the top side. The clearance required to open the door is 40cm.
- The sterilizer should be placed on a level worktable.
- Do not cover or block the door, ventilation, or radiation openings on the sterilizer.
- Do not install the sterilizer near a sink or in a location where it is likely to be splashed.
- Do not install the sterilizer nearby a heat source.
5. Operation
5.1 Setup
5.1.1 Open the door and remove all of the inner contents for unpacking.
5.1.2 Connect the power cord to an outlet of the appropriate voltage.
5.1.3 Power on
The switch is located underneath the control panel on the front side of the machine.
After switching on, the machine turns on the LCD and shows the door position, water level, working program, date, time and etc.
Audited Supplier 
){kind=link}