Veterinary Female Canine Estrus Test Canine Ovulation Detector for Dog Breeding

• Customization: Available
• Type: Canine Ovulation Detector
• Syringe: All
• Model NO.: YJ-ECG6
• Blood Sampling Needle: No
• Breathing Pattern: No
• Animal Anesthesia Machine Control Method: No
• Product Name: Canine Ovulation Detector
• Application: Dog
• Usage: Dog Breeding
• Function: Ovulation Test
• Display: LCD Screen
• Feature: Waterproof
• Battery: Rechargeable
• Color: Black
• Transport Package: Carton Box
• Specification: Weight: 3.5kg
• Trademark: FORERMED
• Origin: China
• HS Code: 8419200000
• Production Capacity: 2000unit/Month
• Package Size: 20.00cm * 15.00cm * 35.00cm
• Package Gross Weight: 5.000kg

Product Description

Veterinary Waterproof Canine Ovulation Detector
YJ-COD100

Product Parameters

 

Parameter
Net weight:	280±10g	Maximum humidity:	85%
Gross weight:	436g/887g	Length of rod:	120mm
Display screen:	About 2.6 inches	Test method:	Automatic one time test
Measuring range:	10-1990.	Test speed:	3 seconds
Operating temperature:	0 to 50 ºC	Power.	One 9V battery, model 6F22
Product configuration:	Ovulator, outer packing box, qualification certificate, instruction manual

Product Description

Method of use

1. Cleaning: wet the towel with sticky detergent to clean, then rinse, withoutdrying directly use.
2. After the animals are normal, the vulva is cleaned, and the detection rodis inserted into the genital tract until it reaches the cervical opening.
3.Insert 1/3 (about 4cm) for small dogs, 6-8cm for medium dogs, and 10cmfor large dogs.
4. After inserting the specified depth, do not adjust the direction, rotate fortwo times, and press the switch of the handle to read the value.
5. Blink for 5 seconds to get the value, hold the position and press the switchagain to read the second group of values. Three sets of data were taken con-tinuously to ensure the accuracy of detection. At this point, if there is a nu.merical deviation, the two groups should be used as the first criterion, andwhether the animal is still during the reading process should be considered.Take the resting state as the final reference.
6. After use, please clean the instrument with detergent

Matters needing attention
1. Be sure to clean with dishwashing liquid before and after the test
2. The insertion depth of each detection should be consistent, for severefluctuation will occur if the insertion depth is too deep or too shallow.
3. Inflammation of the reproductive system may cause abnormal secretionsand affect the detection data.
4. The reproductive svstem has been cleaned durina the estrous period, andthe residual liquid will affect the test results of the data. Do not use the detector for testing on the day after cleaning.
5. In the process of testing, whether the animals keep basically quiet or notarge body movements will cause data bias. Contaminants such as stolengoods, sebum oil, urine, and saline solution can contaminate the electrodes

No estrus: below 200 Proestrus: 300-1999 (rising daily)Late estrus:1999-800 (falling daily)First breeding: 800-600 (down per day)Second breeding: 550-400 (after 36 hours).Over estrus: less than 200 (36 hours after mating)
Remark:
* lt must be determined that the data is in the declining period through 2-3times of testing, and mating according to the reference.
* lf the breeding data did not decrease in the second time, breeding shouldbe stopped and continuous testing should be carried out every half day.
*  lf there is no decline more than 24 hours after mating, continuous dailytesting should be carried out. If there is rebound, re-mating must be consid-ered.
* The data were always under 300 considering uterine or ovarian disease.
*  Follicle development retardation should be considered if the maximumvalue is less than 1000. and the reference value should be depressed according to the situation

Company Profile

 

FAQ